Skip to content

Cart

Your cart is empty

Margin Walker (105)

Sale price$120.00
Size:

Premium Interior Mineral Paint with Functional Wellness Pigments (including clear quartz, hematite, goethite and/or chromite depending on shade)

For interior walls and ceilings

Suitable for residential and commercial applications

Margin Walker (105)
Margin Walker (105) Sale price$120.00

CRADLE TO CRADLE CERTIFIED®

ALL-NATURAL & NON-TOXIC

ZERO VOC, NO ODOR OR OFF-GASSING

SELF-PRIMING & HIGH-PERFORMANCE

NO SOLVENTS, PLASTICIZERS OR BIOCIDES

ANTI-MOLD & ANTI-FUNGAL

NON-FLAMMABLE (Class A ASTM E 84)

VEGAN & CRUELTY-FREE

STEEL CANS ARE INFINITELY RECYCLABLE

HAND-CRAFTED & MADE TO ORDER

FINISH

Velvet matte finish with high luminosity and light reflective value

Find out more about why we only offer this one earth-friendly finish

APPLICATION INSTRUCTIONS

1. INTRO

Alkemis Paint is easy to apply and requires no special equipment or training. Its advantageous attributes and outstanding performance can be best accomplished using the following process.

USE ON: Walls and ceilings of new or previously painted drywall, plaster, brick, masonry, concrete, stucco or stone. Not recommended on glossy paints or varnish, floors, wood or plastic surfaces.

PLEASE NOTE: Mineral paints appear darker when wet and will dry lighter.

APPLICATION INSTRUCTIONS

2. PREP

Surface must be clean, dry and free of dust and contaminants. Prior peeling paint should be removed and sanded smooth. New plaster or masonry should be cured at least 7 days. New drywall or masonry should be primed with Alkemis Mineral Primer.

APPLICATION INSTRUCTIONS

3. MIX

Stir all containers thoroughly, preferably with slow speed drill and paddle mixer. If you don't have a paddle mixer, stir vigorously with wooden stir stick.

For large surfaces, boxing paint (combining paint into a larger container) helps prevent shade variations from bucket-to-bucket.

Please keep lid on unused paint, so it does not dry out.

APPLICATION INSTRUCTIONS

4. PAINTING

Paint can be applied as supplied. Alternatively, up to 10% water may be added to the first and second coat to make it easier to keep a wet edge so you do not get lap marks. Do not apply more than 10% water as it will impact the washability of the surface.

Add:

  • 3 oz. for 1 quart
  • 1.5 cups for 1 gallon
  • 5.5 cups for 3.5 gallon

APPLICATION INSTRUCTIONS

5. APPLICATION

Work quickly as paint is fast-drying.

Cut-in with a nylon/polyester brush. Only cut-in what you can paint within an hour. Use a 3/8”—1/2” nap synthetic roller and roll into damp cut-in paint.

Last pass should be from ceiling to floor to even out roller pattern.

May be applied by airless spray, 3000 PSI minimum with 0.25—0.29” tip. Remove manifold and spray gun filters.

APPLICATION INSTRUCTIONS

6. TEXTURE/APPEARANCE

For a consistent matte mineral finish, roll on or spray two coats.

Back roll for most even appearance.

For a velvety texture, apply the second coat with a block brush in an X pattern.

APPLICATION INSTRUCTIONS

7. FIRST COAT & TOP COAT

Consistently apply first coat to cover surface with no runs. Allow to dry 2—4 hours.

For best results apply second coat and allow to dry overnight.

See tech data sheet for more details.

NEED A CUSTOM COLOR?

Please contact us and our color specialists will work with you to develop your dream paint color.